Since I live alone and there is no shelf in the toilet, I used to stack the toilet paper vertically.
When I saw it, I thought, "If I make it look like a water pipe, it might blend in with the landscape." So I made something like this.
Note: Matches the size of Japanese rolls of toilet paper. (If the diameter is 115mm-120mm, I think it can be used.)
There is also one for the normal size toilet paper size in Japan. (for diameter 105mm-110mm)
In the past, a customer from Taiwan bought this normal size and contacted me saying "the size was right". You can find it at the following web address.
jp.pinkoi.com/product/8diaCAW3
set content
・Cylinder to lay below
A pipe bent at 90 degrees
*Toilet paper is not included.
Production method
The 90-degree bent pipe is divided into four parts by a 3D printer and then glued together. Due to the characteristics of 3D printers, there are dents and marks around the arrow in the 7th photo.
material
PLA (a type of plastic, a material made from starch such as corn and potatoes)
size
90 degree pipe: Width about 12.8cm x Depth about 17.5cm x Height about 17.5cm
Cylinder: about 12.8cm in diameter x about 3.2cm in height
Notice
*We have some in stock, but if there are many orders, the delivery date will be delayed. We ship about 10 sets a week, so if we receive more orders, it will be delayed accordingly.
・Because it is made of plastic and the inside is hollow, the weight is light.
・In the place of the red arrow on the 7th sheet, there is a dent due to the characteristics of the 3D printer. There is a slightly disturbed trace in the place of the white arrow. It can also occur in other locations. Please note.
・Depending on the production lot, the white may be slightly yellowish white. In the case of additional orders, if you can write down when and where you purchased it last time in the order memo column, we will prepare as many colors as possible to match it.
When I saw it, I thought, "If I make it look like a water pipe, it might blend in with the landscape." So I made something like this.
Note: Matches the size of Japanese rolls of toilet paper. (If the diameter is 115mm-120mm, I think it can be used.)
There is also one for the normal size toilet paper size in Japan. (for diameter 105mm-110mm)
In the past, a customer from Taiwan bought this normal size and contacted me saying "the size was right". You can find it at the following web address.
jp.pinkoi.com/product/8diaCAW3
set content
・Cylinder to lay below
A pipe bent at 90 degrees
*Toilet paper is not included.
Production method
The 90-degree bent pipe is divided into four parts by a 3D printer and then glued together. Due to the characteristics of 3D printers, there are dents and marks around the arrow in the 7th photo.
material
PLA (a type of plastic, a material made from starch such as corn and potatoes)
size
90 degree pipe: Width about 12.8cm x Depth about 17.5cm x Height about 17.5cm
Cylinder: about 12.8cm in diameter x about 3.2cm in height
Notice
*We have some in stock, but if there are many orders, the delivery date will be delayed. We ship about 10 sets a week, so if we receive more orders, it will be delayed accordingly.
・Because it is made of plastic and the inside is hollow, the weight is light.
・In the place of the red arrow on the 7th sheet, there is a dent due to the characteristics of the 3D printer. There is a slightly disturbed trace in the place of the white arrow. It can also occur in other locations. Please note.
・Depending on the production lot, the white may be slightly yellowish white. In the case of additional orders, if you can write down when and where you purchased it last time in the order memo column, we will prepare as many colors as possible to match it.