★ It is both a cup and a water bottle. It is better to use it in more ways.
★ Unique appearance design, protein drink, hand shake drink, easy to make
★ Effectively keep warm for 1-2 hours and cold for 6-8 hours
★Double-layer Stainless Steel extended bottle shoulder, moderate heat dissipation but not overheating
★Double-layer vacuum 304 Stainless Steel main cup, no hot or wet when hot or cold
★ 100% non-toxic through testing, no bisphenol A or plasticizers
★ Uncoated acid and alkali resistant material, suitable for coffee, juice and soda
★ 100% leak-proof, easy to carry around and store
★ Large diameter, easy to hold drinks and light meals
★ All parts are removable, making it super easy to clean without any dead ends.
https://www.youtube.com/watch?v=lAFH_XvTbR4
https://live.staticflickr.com/65535/53612202838_b8511ab085_o.jpg
**【Product specifications】**
Outer box size: depth 9 × width 9 × height 24.8cm
Total weight: about 540g
Bottle dimensions: Ø 8.4 (center) x Ø 6.4 (bottom) x height 24.2 cm
Cup size: Ø 8.6×16.5cm
Bottle capacity: 660ml; bottle weight: 396g
Cup capacity: 454ml; cup weight: 275g
Temperature resistance: 100°C (it is recommended to extend the bottle shoulder below 45°C, not hot to the touch)
**Material:**
Cup - food grade 304 Stainless Steel
Cup lid, movable buckle - polypropylene (PP), Silicone(Silicone)
Extended bottle shoulder - food grade 304 Stainless Steel, polypropylene (PP)
Bottle cap - food grade 304 Stainless Steel, polypropylene (PP), Silicone(Silicone)
**Manufacturing place:**
Australia - Cup lids, movable buckles, bottle caps (Silicone, polypropylene)
South Korea-food grade 304 Stainless Steel raw material
China - Cup Forming
***Cold Keeps Cup: 6 hours Keeps Hot: 1 hour/ Bottle Keeps Cold: 8 hours Keeps Warm: 2 hours**
**【Precautions for use】**
*Please note that since the extended bottle shoulder of this product is not vacuum designed, please be careful about the temperature when holding hot drinks.
*Do not heat it in a microwave oven to avoid damage to the microwave oven.
*Do not place it in the refrigerator or freezer to avoid damage caused by expansion after freezing.
* When filling carbonated drinks, please do not overfill it. Please leave space for the gas to flow. When opening, please hold the bottle tightly and slowly open the cap, allowing some of the gas to flow out first, which can reduce the possibility of the cup lid exploding and the contents spraying out.
* Please avoid shaking when holding carbonated drinks to avoid dangers such as gas causing the air pressure to be too high to open, or the cup lid to explode and the contents to spray out.
* When containing perishable drinks such as milk, you should drink them as soon as possible to avoid the deterioration of milk due to cooling, which may lead to the breeding of bacteria and spoilage.
*When used by children, please do not fill it with overheated drinks to avoid burns.
**[Cleaning and Storage Precautions]**
*This product is designed to be completely unscrewed and disassembled, no bottle brush is needed, and it can be thoroughly cleaned after being completely disassembled.
*Please use a sponge or damp cloth to clean. Do not use vegetable cloth, steel brush, etc. to avoid scratching the Stainless Steel surface.
*Please clean it and air-dry it thoroughly after use to prevent odors or stains and extend its service life.
*When storing, it is recommended to store the extended bottle shoulder and main cup separately and place them in a cool place away from direct sunlight.
**【Cleaning method】**
- Basic cleaning
It is recommended that after each drink is filled, rinse it with warm water or add a little dishwashing detergent. You can use a special cleaning brush or sponge for cups and bottles to avoid scratches. After sufficient washing, please remove the bottle. Place the cap and water bottle upside down to dry.
-Stain cleaning (tea stains, coffee stains, etc.)
When stains such as tea stains and coffee stains occur after using for a period of time, it is recommended to mix white vinegar (or citric acid) and 1-2 teaspoons of baking soda into the bottle and pour hot water (it is normal if bubbles appear at this time) phenomenon), cover the bottle and let it sit for 1-2 hours (extension time depends on the severity of the stain), then pour it out, and clean it according to the basic cleaning procedures.
**【Other notes】**
※ The color of the product image may vary due to the computer interface, so please refer to the color of the actual product received.
**[Notes on returns]**
※"Please note that the hesitation period is not a trial period." According to the provisions of the Consumer Protection Law, consumers have the right to a seven-day hesitation period after the product arrives. Once opened and used, if the product is returned due to problems other than factory defects, an additional Pay the refurbishing fee or no returns allowed.
※ Returned products must be returned to the original condition when you received the product and the packaging must be intact, that is, the integrity of the product, accessories, packaging, manufacturer's carton and all accompanying documents and information must be maintained.
Product Description
Product Details
- Material
- Stainless Steel
- How It's Made
- Machine-made
- Where It's Made
- mainland China
- Unique Features
- Customizable, Licensed product
- Stock
- More than 10
- Ranking
- No.9,455 - Kitchen & Dining | No.883 - Mugs
- Popularity
-
- 5,169 views
- 10 sold
- 103 have saved this item
- Product Type
- Authorized Representation
- Authorized By
- KeepCup
- Listing Summary
- ★Effectively keep warm for 1-2 hours and cold for 6-8 hours ★Double-layer vacuum 304 Stainless Steel main cup, not hot or wet when hot or cold ★100% non-toxic through testing, no bisphenol A or plasticizers ★100% leak-proof, easy to carry around and store ★Large diameter, super easy to hold drinks and light meals ★All parts are removable, making it super convenient to clean without any dead ends.
Shipping Fees and More
- Shipping
- Payment method
-
- Credit/debit card payment
- Alipay
- Refunds & Exchanges
- Read more about refunds and exchanges
- Report
- Report this item