Lili space liil _ Korean stainless steel square storage rack

Korean Stainless Steel square storage rack -Double vacuum adsorption is strong - Strong water resistance and anti-rust and corrosion resistance -Reusable and environmentally friendly -Easy to disassemble and move -No nails, no drilling, no damage to the wall -100% made in Korea How to use: 1. Turn the silver rotating cover button to the left and pull the suction cup down until the end of the suction cup is in the round hole under the tenon to remove it. 2. Use a dry towel to wipe off the moisture and dust on the wall (the irregular curved surface of the wall should not be larger than 1mm) 3. After determining the positions of the two suction cups, fix the suction cups on the wall 4. Tear off the adhesive film on the back of the suction cup, stick it on the wall and press the button to release the air 5. Press the suction cup firmly with your hand and turn the rotating cover to the right to the end 6. Put the end of the suction cup into the hole under the tenon, pull the shelf down and let the suction cup snap into the upper hole of the tenon, and the installation is complete. -Suitable for installation on smooth walls: glass/mirror/polished tiles/ Acrylic, etc. -Wall surfaces not suitable for installation: marble/cracked/uneven Product specifications -Dimensions: height 7.3/length 25/width 14cm -Material: ABS plastic rotating cover, Stainless Steel storage rack, polyurethane adjustment plate, NBR rubber suction cup -5kg load capacity -Made in Korea Wall smoothing sticker: -The suction cup series can be used in unlimited places and can be used on walls that cannot be completely vacuumed. -This patch is a one-time product -Tearing it off may cause damage to the Cement wall. -Please evaluate in detail before use ⚠️Please confirm the pasting position before use⚠️ ⚠️Not suitable for walls with cancer, dust, and large cracks⚠️ How to use: 1. Wipe off the moisture and dust on the wall and then apply a smoothing sticker 2. Tear off the suction cup film and fix it on the smooth sticker, press the middle vacuum button to release the air 3. Press the suction cup firmly, install the parts in sequence and turn the rotating cover to the right to complete the installation. https://www.youtube.com/watch?v=gjigD76rfA8&t=4s https://www.youtube.com/watch?v=6mJZDlBMySc https://www.youtube.com/watch?v=NQeVmgOFJM0&t=3s https://live.staticflickr.com/65535/52439122364_4ca4c08e52_o.jpg https://live.staticflickr.com/65535/52662185526_7f8ea8c5a7_o.png