Starry sky/Building magnetic buckle cover/Sensor buckle cover/AirTag /Hand-dyed leather

Building magnetic buckle cover, can accommodate AirTag ~ The key ring can be separated from the magnetic buckle cover for 2 uses~ The starry sky key ring has engraved hollow stars~ Because the starry sky model is hand-dyed, the color division of each finished product will not be the same. There may be a difference in size or color placement of purple or blue blocks. Other hand-dyed leather and stitching color selection reference ~ (remark method A1/42) https://www.pinkoi.com/product/jbiMmKqs Size (there will be errors in the amount of hands~) The magnetic buckle cover is 5.5X high and 4.5CM wide, and the total length of the leather buckle is 7CM Key ring height 7X width 2.8CM It can be put into the drop-shaped 4X3CM inner induction magnetic buckle. Instructions Insert the flat end screw into the leather sheet and leather case first (you can choose whether to put the key ring in or not) Then lock the slotted screw in (turn the screw by hand or use a slotted screwdriver, please tighten it tightly) material Imported vegetable tanned cowhide **Precautions** ☆The products are all hand-sewn freely by the designer, including dyeing and matching stitches. ☆All products can be customized for drawing, coloring, dyeing, stitching and color matching. Welcome to write and communicate for customizing and making unique finished products~ ☆Because of the shooting light, the color rendering of each computer and the shooting light angle are different, There may be a slight difference in color between the photo and the actual product, please refer to the actual product! ☆Each piece of leather may have different softness and hardness, and there must be some spots and scars, and the color will also be dark or light, just like human skin. Due to these factors, there will be some gaps with the photos during dyeing and production. The real thing shall prevail! ☆How many handmade traces will be handmade, this is a normal phenomenon of handmade, It also shows the uniqueness of each handmade product and the warmth of handmade products. Please understand the characteristics of handmade works. ☆Perfectionists, please think again, or make good use of the message communication on the site, and you can accept another order! ◎Free engraving within 10 characters, including spaces, you can choose upper and lower case, please note when ordering. 1 uppercase, other lowercase or all lowercase (the number of characters is limited to 8-10 characters, and the width of the characters is about 2.5-4 cm, which depends on the number of characters that can be stored in the product) All uppercase (6-8 characters within a width of about 4 cm should be based on the number of characters that can be stored in the product) Font size - upper case is about 0.5 cm high, lower case is about 0.2-0.5 cm ◎The engraving position is like the product picture maintenance method ☆ Regular use is the best maintenance method ☆ Natural leather will gradually become darker due to your use, and the color change varies from person to person. ☆ If it comes into contact with water, please dry it immediately and let it dry in a cool place. If the product is not in use, please place it in a dry and ventilated place. ☆ Please use leather maintenance oil, apply a small amount evenly on the surface and wait for absorption before continuing to use.